After-sales Service: | Supplied |
---|---|
Warranty: | 30 Years |
Type: | Seamless |
Technique: | Cold Drawn |
Material: | Carbon Steel |
Surface Treatment: | Varnishing |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Product Name | En10216 P235gh-Tc1 Seamless Cold-drawn Boiler Tube | |
Size | OD | 17.2-168.3mm |
Thickness | 1-15mm | |
Max Length | 19m | |
Steel Material | ASTM A178/179/192/210, A106, EN10216-1/2, DIN17175/1629, JIS G3454, etc. | |
Steel Grade | A179,A192,GR.A/B/C, P235TC1/2, P235GH, ST45.8, ST37, | |
STB340, STB440,15MoG, 15CrMoG, 16Mn,13CrMo4-5, etc. | ||
Process | Cold drawn, Cold rolled | |
Usage | for the heat-transfer equipment; for high, middle, low pressure bolier and pressure purpose; applied for manufacturing pipeline, vessel, equipment, pipe fittings and steel structure , etc | |
Surface | Oil, varnish, passivation, phoshating, shot blasting, etc | |
End | Plain, Beveled with caps | |
Package | Reinforced plywood case bysted angle bar, | |
Playwood cased Plastic bags packing, Condenser, | ||
heat exchanger tube packing, | ||
U-tube packed with wooden cases. | ||
Inspection | With Hydraulic Testing, Ultrasonic testing or X-ray Test | |
Certificate | ISO9001/2000 | |
TPI | TUV, SGS, BV, Lloyd's, etc. | |
Payment: | L/C at sight, L/C 180 days, T/T, D/P, OA, Western Union, | |
Port of Shipment | Shanghai port in China |
Standard | Grade | Chemical Components (%) | Mechanical Properties | ||||||||||
C | Si | Mn | P | S | Mo | Cr | V | T.S. (Mpa) | Y.S. (Mpa) | E.L. (%) |
Hardness (HRB) |
||
ASME SA179 | SA179 | 0.06-0.18 | / | 0.27-0.63 | ≤0.035 | ≤0.035 | / | / | / | ≥325 | ≥180 | ≥35 | ≤72 |
ASME SA192 | SA192 | 0.06-0.18 | ≤0.25 | 0.27-0.63 | ≤0.035 | ≤0.035 | / | / | / | ≥325 | ≥180 | ≥35 | ≤77 |
ASME SA210 | A1 | ≤0.27 | ≥0.10 | ≤0.93 | ≤0.035 | ≤0.035 | / | / | / | ≥415 | ≥255 | ≥30 | ≤79 |
C | ≤0.35 | ≥0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | / | / | / | ≥485 | ≥275 | ≥30 | ≤89 | |
ASTM A333 /A334 | GR.1 | ≤0.30 | / | 0.4-1.06 | ≤0.025 | ≤0.025 | / | / | / | ≥380 | ≥205 | ≥35 | -45° |
GR.6 | ≤0.30 | ≥0.10 | 0.29-1.06 | ≤0.025 | ≤0.025 | / | / | / | ≥415 | ≥240 | ≥30 | -45° | |
GR.8 | ≤0.13 | 0.13-0.32 | ≤0.90 | ≤0.025 | ≤0.025 | / | / | 8.40-9.60 | ≥690 | ≥515 | ≥22 | -195° |
U bend tubes for heat exchangers applied mostly in oil and gas plants, chemical and petrochemical plants, refineries, power plants and renewable energy plants. Low fin tubes can be supplied in the form of U bends.
U-bend tubes are widely used in heat-exchanger systems. Heat-exchanger equipment on the basis of seamless stainless U-tubes is essential in strategically important and critical fields - nuclear and petrochemical machine building.
Item | Condition (when) | Tolercance |
---|---|---|
Ovality | Nominal bend radius ≤ 2 x nominal OD | less than or equal to 12% |
2 x nominal OD < Nominal bend radius ≤ 4 x nominal OD | less than or equal to 10% | |
Nominal bend radius > 4 x nominal OD | less than or equal to 5% | |
Nominal bend radius ≤ 2 x nominal OD | 0.75 x nominal wall | |
Mimimum wall thickness | 2 x nominal OD < Nominal bend radius ≤ 4 x nominal OD | 0.8 x nominal wall |
Nominal bend radius > 4 x nominal OD | 0.9 x nominal wall | |
Nominal bend radius ≤ 8" (200mm) | +/-3/64"(1mm) | |
Bending Radius | 8" (200mm) < Nominal bend radius ≤ 16" (400mm) | +/-1/16"(1mm) |
Nominal bend radius >16" (400mm) | +/-5/64"(1mm) | |
Disrance between legs | Max 1/16"(1.5mm) | |
Wall thinning of bending area | Max 17% | |
Difference between leg lengths at the ends | Leg length ≤ 16' (4.88m) | +1/8"(3mm) |
Leg length > 16' (4.88m) | +3/16"(5mm) | |
Deviation from plane of bend | ≤ 3/16"(1.5mm) | |
Flattening on bend | ≤ 10% nominal diameter | |
Straight leg length | ≤5m | +1/8"(3mm) |
>5m | +3/16(5mm) | |
Total tube length including radius | ≤6m | +3/16(5mm) |
>6m | +5/16"(8mm) |
'U' bends are produced, controlled and measured fully in accordance with relevant standards.
Material | Grade |
Carbon Steel | SA 179 / A 179 |
Carbon Steel | SA 210 / A 210 |
Carbon Steel | SA 334 / A 334 |
Stainless Steel | SA 213 / A 213 |
Duplex Stainless Steel | SA 789 / A 789 |
U-bend tubes are widely used in heat-exchanger systems.
Heat-exchanger equipment on the basis of seamless stainless U-tubes is essential in strategically important and critical fields - nuclear and petrochemical machine building.
Fin tubes are used in applications involving the transfer of heat from a hot fluid to a colder fluid through a tube wall. Furthermore, finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside.
Suppliers with verified business licenses