C10200 C10300 ASTM B75/68/280 Tube Copper Pipe

• Customization: Available
• Type: Copper Pipe
• Length: 10mm-12000mm
• Model NO.: ASTM B75/68/280 Copper Tubes
• Process: Bending, Decoiling, Welding, Punching, Cutting
• Diameter: 4mm, 6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 22mm, 28mm,
• End: Plain End/Bevel End
• Test: BV, SGS Is Available
• Model Number: C44300/C10200/C10300
• Processing: Customized
• Wall Thickness: 1mm~220mm (Sch5X~Sch Xxs)
• Used: Factory, Decoration, Food
• Packing: Standard Sea Worthy Package
• Delivery Time: 10-30 Working Days
• MOQ: 1 Ton
• Application: Building, Sanitation, Seawater Desalination
• Technical: Hot Rolled/Cold Drawn
• Outside Diameter: 8mm, 10mm, 12mm, 15mm, 18mm, 28mm, 35mm, 42mm, etc
• Transport Package: Woven Bag/Wooden Case
• Specification: Brass/Copper
• Trademark: EZS
• Origin: China
• Production Capacity: 1000000 Kgs/Year

Product Description

 

Product Name	C10200 C10300 ASTM B75/68/280 Tube Copper Pipe
Size	Outside Diameter	2-914mm
	Thickness	1mm~220mm (Sch5X~Sch XXS)
	Max Length	1-50m
Surface	Polished,Yellow,Red
Process	Cold drawn, Hot Rolled
Usage	Gas Industry, Oilfield, Thermal power, Oil industry, Shipbuilding, Petrochemical, Tanker, Nuclear , etc
Surface	Pickling and annealing,pickling and annealing+polishing+ EP(Electricity polish)
End	Plain, Beveled with caps
Processing Service	Bending, Decoiling, Welding, Punching, Cutting
Standard	GB/T 19849-2005, EN 1254-1, ASTM B88M, BS EN1254, DIN 2856, etc.
Payment:	L/C at sight, L/C 180 days, T/T, D/P, OA, Western Union,
Port of Shipment	Shanghai port in China

Short Description:
This specification establishes the reguirements for seamless tube and ferrule stock of copper and various copper alloys of a specified range of diameters, for use in surface condensers, evaporators and heat exchangers.

The specified coppers and copper alloys are UNS No. C10100,C10200,C10300,C10800,C12000,C12200,C14200,C19200,C23000,C28000,C44300,C44400,
C44500,C60800,C61300,C61400,C68700,C70400,C70600,C70620,C71000,C71500, C71520,C71640 and C72200. The product shall be produced by processes such as casting, extrusion, drawing, annealing, straightening, trimming, and other processes which may produce a seamless tube in the specified condition. The coppers and copper alloys shall be specifically furnished in any one of the following tempers.: annealed, light-drawn, hard-drawn, or hard drawn and end annealed. Tubes for ferrule stock shall be annealed sufficiently to be fully crystallized.

Some tubes are suggested to be subjected to a stress-relieving thermal treatment subsequent to
straightening. The products shall be subjected to expansion, flattening, and residual stress tests
The tensile and expansion requirements for the products are specified in accordance with the
temper desianation. The products shall also be subjected to mercurous nitrate, ammonia vapor.
Eddy-current, hydrostatic, and pneumatic tests.

Copper UNS C10200 Annealed Tube Applicable Specification

Form	Application	Specific Sub - Form	System	Standard
Seamless Condenser Tube & Ferrule Stock	Condenser Tube	Seamless	ASME	SB111
Seamless Condenser Tube & Ferrule Stock	Condenser Tube	-	ASTM	B42, B698
Bus Bar	-	-	ASME	SB42
Bus Bar	-	-	ASTM	B188
Tube, water	-	-	ASTM	B88M, B88
For Air Conditioning and Refrigeration Field Servi	-	-	SAE	J461
For Air Conditioning and Refrigeration Field Servi	-	-	MILITARY	MIL - T - 24107
For Air Conditioning and Refrigeration Field Servi	-	-	ASTM	B75/B75M
For Air Conditioning and Refrigeration Field Servi	-	-	MILITARY	MIL - T - 24107
-	-	-	ASTM	B716
-	-	-	ASTM	B395/B395M
-	-	-	ASTM	B640
-	-	-	ASME	SB75
-	-	-	ASTM	B280
-	-	-	ASTM	B359/B359M
-	-	-	ASME	SB395
-	-	-	SAE	J461
Bus Bar	-	-	ASME	SB359
Bus Bar	-	-	ASTM	B188
For Air Conditioning And Refrigeration Field Servi	-	-	SAE	J461
For Air Conditioning And Refrigeration Field Servi	-	-	SAE	J463
For Air Conditioning And Refrigeration Field Servi	-	-	MILITARY	MIL - T - 3235
Rectangular Waveguide	-	-	ASTM	B372
Rectangular Waveguide	-	-	ASTM	B641
Rectangular Waveguide	-	-	ASTM	B743
Rectangular Waveguide	-	-	ASTM	B641
Rectangular Waveguide	-	-	ASTM	B447
Rectangular Waveguide	-	-	SAE	J463
Rectangular Waveguide	-	-	MILITARY	MIL - W - 85

 

 

Size Chart Of Copper C10300 Tubes

SIZE	Length	Thickness	Weight Per	Weight	Weight Per	No. of Tubes
-	-	-	3 MTR	Per MTR	Bundle	Per Bundle
12MM	3 MTR	0.9	0.690	0.230	27.6	40
12MM	3 MTR	0.7	0.480	0.160	24	50
15MM	3 MTR	0.9	1.100	0.367	27.5	25
15MM	3 MTR	0.7	0.690	0.230	27.6	40
22MM	3 MTR	0.9	1.630	0.543	32.6	20
35MM	3 MTR	1.2	3.450	1.150	34.5	10
28MM	3 MTR	0.9	2.080	0.693	31.2	15
42MM	3 MTR	1.2	4.200	1.400	29.4	7
76MM	3 MTR	1.5	9.480	3.160	28.5	3
54MM	3 MTR	1.2	5.450	1.820	27.3	5
108MM	3 MTR	2.5	22.290	7.430	44.6	2

 

Classification	Details
Material Name	C10200 Oxygen Free Copper (CDA 102)
Standards	UNS CDA 102, SAE J461, ASTM B152, ASTM B187, ASTM B272
Characteristics	High ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, low volatility under high vacuum
Typical Uses - Electrical Field	Electrical Conductors, Klystrons, Microwave Tubes, Transistor Components, Lead In Wire, Coaxial Cables, Copper to Glass Seals in Electronic Appliances, Busbars, Bus Conductors, Wave Guides
Typical Uses - Industrial Field	Tubing, LP Gas Service Tubing, Medical Gas - Oxygen Tubing, Vacuum Seals, Coaxial Tube, Billet Mold Tube, Extrusion Cans for Powder Metallurgy

 

Expansion Test

• Tube specimens selected for test shall withstand the expansion shown in standard when expanded in accordance with Test Method B 153. The expanded tube shall show no cracking or rupture visible to the unaided eye.
• Hard-drawn tubes not end annealed are not subject to this test. When tubes are specified end annealed, this test is required and shall be performed on the annealed ends of the sampled tubes.
• Tubes for ferrule stock are not subject to the expansion test.

Flattening Test

• Test Method-Each test specimen shall be flattened in a press at three (3) places along the length, each new place to be rotated on its axis approximately one third turn from the last flattened area. Each flattened area shall be at least 2 in. in length. A flattened test-specimen shall allow a micrometer caliper set at three (3) times the wall thickness to pass freely over the flattened area. The flattened areas of the test specimen shall be inspected for surface defects.
• During inspection, the flattened areas of the test- specimen shall be free of defects, but blemishes of a nature that do not interfere with the intended application are acceptable.
• Tubes for ferrule stock are not subject to flattening test.

Residual Stress Test

• A residual stress test is required to be performed only for Copper Alloy UNS Nos. C23000, C28000, C44300, C44400, C44500, C60800, C61300, C61400, and C68700.
• Unless otherwise specified, the producer shall have the option of testing the product to either the mercurous nitrate test, Test Method B 154, or the ammonia vapor test, Test Method B 858, as prescribed below.

Nondestructive Testing

Eddy-Current Test-Each tube shall be passed through an eddy-current testing unit adjusted to provide information on the suitability of the tube for the intended application. Testing shall follow the procedures of Practice E 243.

Hydrostatic Test

Each tube shall stand, without showing evidence of leakage, an internal hydrostatic pressure sufficient to subject the material to a fiber stress of 7000 psi [48 MPa] as determined by the following equation for thin hollow cylinders under tension. The tube need not be tested at a hydrostatic pressure of over 1000 psi [7.0 MPa] unless so specified.

 

Detailed Photos

 

 

 

Processing of Production