ASTM A803 Ferritic Stainless Steel Feedwater Heater Exchanger Tubes

• Customization: Available
• After-sales Service: Oversea After-Sales Service
• Warranty: Confirm with The Sellers
• Model NO.: ASTM A803
• Technique: Hot Rolled
• Material: Carbon Steel
• Surface Treatment: Polished
• Usage: Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Food/Beverage/Dairy Products, Machinery Industry, Chemical Industry, Mining, Special Purpose
• Section Shape: Round
• Standard1: DIN 17175/2448,ASTM A213,ASTM A210
• Standard2: JIS G3461 STB 340, 410, JIS G3462 Stba 22, 23, 24
• Steel Grades: St.35.8, Gr. T-11, T-12, T-22
• Unit Leagth: 5800mm-12000mm
• Wt: 1.6mm-40mm
• Od: 3-610mm
• Ends: Plain Ends
• Products: ASTM A213 Gr. T-11, T-12, T-22 Seamless Steel Tube
• Surface: Pickled, Bright Annealed, Polished
• Delivery: 7-35 Days
• Usage1: Pipeline Transport, Boiler Pipe, Hydraulic/Automob
• Usage2: Oil & Gas Transportation, Power Station
• Usage3: Electronics, Industrial, Food, Boiler, Fluid
• Usage 4: Sugar Mill,Mining,Manufacturing,Dewatering
• Package: Packed by Bundles, Plastic Bags, Wooden Case,etc
• Transport Package: Seaworthy Package
• Specification: 0.8mm-25mm
• Trademark: EZ Steel
• Origin: China
• HS Code: 73043110
• Production Capacity: 500000/Year

Product Description

ASTM A803 Ferritic Stainless Steel Feedwater Heater Exchanger Tubes

Product Description

ASTM A803 seamless pipes tubes Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. The tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.
 

Product Name	ASTM A803 Ferritic Stainless Steel Feedwater Heater Exchanger Tubes
Material	St.35.8, GR. T-11, T-12, T-22
Standard	ASME SA-106, ASME SA-192M. ASME SA-209M. ASME SA-210M.ASTM A 106M. ASTE A192M.EN 10216-2. DIN 17175, JIS G 3456. JIS G 3461. JIS G 3462
Grade	SA-106B, SA-192. SA-210A1, SA-106C, SA-210C. SA-209T1. SA-213 T11.
Uses	For manufacture wall panel, economizer, reheater,superheater and steam pipeline of boilers

Steel Grade:	106B,210A1,210C,P9,P11,T1,T11,T2,T5,T12,T22,T23,T91,T92,P235GH,13CrMo4-5,15Mo3,10CrMo9-10, ST35.8,ST45.8,STB340,STBA 12-2,API5L,5CT 304,304L,309S,310S,316,316L,317,317L,321,347,347H,304N,316L, 316N,201,202,S32205,S31803
Standard:	ASME/ASTM SA/A53/513/106/209/210/213/335/178/179/519                                        ASME/ASTM SA/A213,A312,A269,A778,A789,                                                    DIN 17456, DIN17457,DIN 17459,DIN17175,EN10216,BS3605,BS3059                                                             JIS G3458,JISG3459,JIS G3461,JIS G3462,JIS G3463
Specification:	Outdiameter 3-610mm
Wt:	1.6-40mm,or according to customer's special request
Length:	2-20meters,or according to customer's special request
Package:	Pakced by bundles, plastic bags, wooden case, etc.
Typies of tube:	Boiler tube,precision tube,mechanical tubing,cylinder tube,line pipes,etc
Mill MTC:	Supplied before shipment
Inspection:	The Third Party inspection can be accepted,SGS,BV,TUV
Mount port:	Any port in China
Trade Term:	FOB,CIF,CFR,EXW,etc.
Price Term:	TT or LC at sight
Our services:	We can customized  according  to customer's requriement or drawing ,packaging according  to customers' request

 

Material Grade	Standard	Outer Diameter		Thickness		Length	Heat Treatment	Manufacturing Shapes
		Seamless Pipe	Welded Pipe	Seamless Pipe	Welded Pipe			Seamless Pipe	Welded Pipe
TP321 TP321H	ASTM A312 / ASME SA312, GB/T 13296,GB/T 14975,GB/T 14976 JIS, DIN, EN, AISI	4mm-914.4mm	single slit(Φ8mm-Φ630mm); girth(Φ630mm-Φ3000mm),	0.6mm - 60mm	single slit(0.5mm-25mm);girth(3mm-45mm)	1.0-12 m or as customers' request	Normalized, Normalized & Tempered	Hydraulic, Round, Square, Hex, Honed	Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends)

Surface Finish	Applications	Trade Terms	Delivery Condition	Delivery time	Package	Seaworthy packing	Inspection and Test Reports
No.1, No.4, No.8 Mirror Finish, 2B,Finish as per customer Requirements	Petrochemical industry, chemical fertilizer industry, oil refining industry, oil and gas industry, light industry and food industry, pulp and paper industry, energy and environmental industries.	EXW, FOB, CFR, CIF	Annealed and Pickled, Polished, Bright Annealed, Cold Drawn	Shipped in30-60days after payment	Standard sea-worthy package or as required	20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM	EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI ,Ultrasonic Test Reports, Mechanical Reports, Third Party Inspection(if needed), Visual Inspection, Destructive Test and Non Destructive Test Reports
						40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM

FAQ

Q:  How many days can you deliver after confirmed the order?
A:  For stock:  within 5-7 days;
      For customized product:  around 30 days;
      For special sizes:  subject to negotiation.

Q: How does your company do quality control?
A: ISO 9001:2015 certified;
     Product certificate as per EN10204 3.1 or 3.2 as per customer's request.
    
  
Q: Can I have a factory-visit?
A:  Surely. All customers are welcome to visit us in China.

Q: Can I have a trial order?
A: Of course, it is an honor for us to have the opportunity to show our quality and service. 
 

Company Profile

	Business Type:	Manufacturer/Factory
	Main Products:	Carbon Steel Pipe , Stainless Steel Pipe , Copper Nickel Tube , Heat Exchanger Tube , Boiler ...
	Registered Capital:	2000000 RMB
	Plant Area:	>2000 square meters
	Management System Certification:	ISO 9001, ISO 14001, OHSAS/ OHSMS 18001, ANSI/ESD
	Average Lead Time:	Peak Season Lead Time: 1-3 months Off Season Lead Time: within 15 workdays

SGS Serial NO. :

QIP-ASI199413Report Verification

EZ STEEL INDUSTRIAL Co., Ltd, together with LONG-RUN METALS Co., Ltd, is the export division and window company of EZ STEEL GROUP, which was founded in 1996 and has been committed to the development and manufacturing of industrial tubes in the past 20 years. It is one of the largest steel tube manufacturing enterprise groups in China. The group possess fixed assets over 200million and more than 800 employees with annual production capacity over 300 thousand tons.

The company has continuously introduced the world advanced manufacturing equipment and now is able to produce welded and seamless steel tube, copper tube and nickle alloy tube. We also have our own coating facilities and workshops for further processing. After years of development, EZ STEEL GROUP and the affiliated enterprises have obtained many kinds of domestic and international certifications including ISO 9001 Quality Management System Certification, ISO14000 Environment Management System Certification, CE, License for Manufacture of Pressure Piping in China, etc. The company has obtained good domestic achievements and is the nominated supplier of CNPC and CNOOC. The product are exported to Southeast Asia, the Middle East and Africa, Europe, Australia, North and Latin Americas via trade companies, and are widely used in pipeline works, foundation works, steel structure works, boiler and condenser fabrication, oil refinery plant, power plant, sugar-making plant, ship-building and offshore construction projects etc.

Holding the concept of First-class Brand, First-class Service, First-class Value, EZ STEEL GROUP is aiming to build up a win-win enterprise platform for both our customers and employees.

CONTACT US
Contact: Rosy Xu
EZ STEEL INDUSTRIAL CO., LTD
Add: No.66,  Zhongyi Road, Yuhua Industrial Zone, Changsha City , P.R China 

Pls. do not hesitate to contact me if you have any questions!

You are warm welcomed to visit our factory!!!

Thank you for visiting our products & Looking forward to hearing from you!