Customization: | Available |
---|---|
After-sales Service: | Supplied |
Warranty: | Supplied |
Still deciding? Get samples of US$ 0.99/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Standard Grade | ASTM B 111C70600 | EN 12451 CuNi10Fe1Mn (CW352H) |
DIN 17664/1785 CuNi10Fe1Mn |
BS 2871CN102 | JIS H3300C7060 | GB/T 8890BFe10-1-1 |
Cu | Bal. | Bal. | Bal. | Bal. | JIS H3300 | Bal. |
Pb | 0.05 max | 0.02 max | 0.03 max | 0.01 max | C7060 | 0.02 max |
Fe | 1.0-1.8 | 1.0-2.0 | 1.0-1.8 | 1,0-2,0 | Bal. | 1.0-1.5 |
Ni | 9.0-11.0 | 9.0-11.0 | 9.0-11.0 | 10.0-11.0 | 0.05 max | 9.0-11.0 |
Zn | 1.0 max | 0.5m ax | 0.5m ax | - | 1,0-1.8 | 0.3m ax |
S | - | 0.05 max | 0.05 max | 0.05 max | 9,0-11.0 | 0.06 max |
P | - | 0.02 max | - | - | 0.5 max | 0.06 max |
Mn | 1.0 max | 0.5-1.0 | 0.5-1.0 | 0.5-1.0 | 0.05 max | 0.5-1.0 |
C | - | 0.05 max | 0.05 max | 0.05 max | - | 0.05 max |
Sn | - | 0.03 max | - | - | 0.2-1.0 | 0.03 max |
Total impurities | - | 0.2max | 0.1 max | 0.3 max | 0.02max | 0.7 max |
Condition | O61 | R290 | F29 | M | - | M |
H55 | R310 | - | O | - | Y2 | |
- | R480 | - | - | - | - | |
Yield Strength N/mm2 |
105 min | 90 min | 90-180 | - | - | - |
240 min | 220 min | - | - | - | - | |
- | 400 min | - | - | - | - | |
Tensile Strength N/mm2 | 275 min. | 290 min | 290 min | - | - | 300 min |
310 min. | 310 min | - | - | - | 345 min | |
- | 480 min. | - | - | 275 min | - | |
Elongation(%) | - | 30 min | 30 min | - | - | 30 min |
- | 12 min | - | - | - | 11 min | |
- | 8 min | - | - | 30 min | - | |
Hardness Hv5 | - | - | - | 150 min | - | - |
- | - | - | 80-110 | - | - | |
- | - | - | - | - | - | |
Typical use | Used for the working in sea water, mainly for shipbuilding and sea water pipelines, thermal power, desalination for its very good corrosive resistance. Melting Point: 1150ºC· Hot Working Properties: Good Density(20ºC): 8,94 g/cm3 · Cold Working Properties: Good |
|||||
Weight Formula | Average Wall: (OD-WT) x WT x0,0284 = Kg/m (all sizes in mm) Minimum Wall: (OD-WT)×WT ×0,0295 = Kg/m (all sizes in mm) |